Uponor c56, Инструкция по установке и эксплуатации

Страница: 34 / 56

8.3 Operate Thermostat T-54 Public
Uponor Thermostat T-54 Public contains a switch that sends
an alarm when the thermostat cover is opened. The alarm is
transmitted by radio, causing both the power LED and related
channel LED to fl ash.
During normal operation the thermostat LED fl ashes once only
with each radio transmission.
The illustration below shows Uponor Thermostat T-54 Public.
The table below describes the numbered items in the
illustration.
Item Description
1
Screw for opening the thermostat
2
Terminal for external sensor (non-polarized)
3
Batteries
4
Setpoint temperature potentiometer
5
Confi guration switches
6
Floor sensor potentiometer
7
Registration button
8
Radio transmission LED
CAUTION
Thermostats are located in specifi c areas for optimum
performance. Changing the location of thermostats can
cause abnormal temperature control.
Change temperature set point
It is not possible to set minimum and maximum temperatures
using Uponor Thermostat T-54 Public unless Uponor Interface
I-75/76 is installed.
The illustration below shows how to change the temperature set
point in Uponor Thermostat T-54 Public.
To change the Uponor Thermostat T-54 Public temperature
setpoint:
1 Remove the cover.
2 Select the desired temperature using the potentiometer.
3 Put back the cover and tighten it in place.
Replace batteries
Replace the batteries of the thermostat when the red LED
inside the thermostat fl ashes twice during a heating or cooling
demand. The illustration below shows how to open the
thermostat.
STOP
1
2
2
3 4
U P O N O R C O N T R O L S Y S T E M – I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
UK English