background image

4G PRIMARY 

ALARM COMMUNICATOR

10

uPlinkGPs autoPRO vehiCle tRaCkinG systeM                   
installatiOn, OPeRatiOn and PROGRaMMinG Guide

© 2012 Uplink Security LLC. All rights reserved. Uplink is a trademark of Uplink Security LLC.

3330 CUMBERLAND BLVD., SUITE 700, ATLANTA, GA 30339

888-987-5465 (888-9-UPLINK)

WWW.UPLINK.COM

®

Uplink warrants, to parties purchasing Uplink equipment directly 
from Uplink, i.e., to its authorized distributors and to no other parties, 
that for 12 months following the date of purchase, Uplink equipment 
will be free of defects in materials and workmanship when installed, 
operated, maintained, and serviced in strict accordance with 
Uplink’s and, if applicable, the manufacturer’s requirements. If Uplink 
equipment fails because of a defect in materials or workmanship 
within the warranty period, Uplink will, at its sole option and at no 
charge, repair or replace it. Uplink’s agreement to repair (using 
new or reconditioned parts) or replace (with a comparable new or 
reconditioned Uplink unit) is the exclusive remedy with respect to 
Uplink Equipment found to be defective in materials or workmanship; 
this remedy will not be deemed to have failed of its essential purpose 
so long as Uplink is willing and able to repair or replace the defective 
unit as provided above or, at Uplink’s sole option, to refund the 
purchase price paid. Parties purchasing Uplink equipment from a 
distributor are referred to the distributor with respect to any product 
claims they may have.

THE FOREGOING WARRANTY IS LIMITED AND IS THE ONLY 
WARRANTY OFFERED HEREUNDER. UPLINK MAKES NO OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT 
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-
INFRINGEMENT, AND NON-OBSOLESCENCE. THE FOREGOING 
WARRANTY FURTHERMORE DOES NOT COVER UPLINK DEVICES 
THAT (A) HAVE BEEN IMPROPERLY INSTALLED, MAINTAINED, OR 
SERVICED; (B) HAVE BEEN TAMPERED WITH OR DEFACED; OR (C) 
HAVE BEEN SUBJECTED TO ABUSE OR A HOSTILE OPERATING 
ENVIRONMENT. 

No Warranty – Services

ALL SERVICES ASSOCIATED WITH UPLINK DEVICES INCLUDING, 
WITHOUT LIMITATION, NETWORK CONNECTIONS ENABLED BY 
UPLINK, ARE PROVIDED STRICTLY AS-IS, WITHOUT WARRANTY 
OF ANY KIND INCLUDING, WITHOUT LIMITATION, WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, 
TITLE, NON-INFRINGEMENT, NON-OBSOLESCENCE, NON-
INTERRUPTION, AND FREEDOM FROM ERROR.  

Other terms and conditions and limitations of liability apply as set 
forth in the applicable contractual agreement with Uplink.

FCC & Industry Canada Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications.

However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

FCC RF Exposure Information
Caution: Maintain a separation distance of at least 20 cm (8 inches) is 
normally maintained between the transmitter’s antenna and the body 
of the user or nearby persons. The Modem is not designed for or 
intended to be used in portable applications within 20 cm. (8 inches) 
of the body of the user.

GPS VEHICLE

TRACKING SYSTEM

GPS VEHICLE

TRACKING SYSTEM

Содержание autoPRO-1













Отзывы: