The following tools are required and should be available:
•
Screw driver for Torx – size TX 20
or screw driver or small ratchet wrench with a bit head and bit size TX 20
Screw driver for Torx – size TX 30
or screw driver or small ratchet wrench with a bit head and bit size TX 30
Screw driver for cross screws – size PH 2
or screw driver or small ratchet wrench with a bit head and bit size PH 2
Screw driver for cross screws – size PH 3
or screw driver or small ratchet wrench with a bit head and bit size PH 3
Screw driver slot screws – size about 5 mm
Accumulator screw machine or drill machine
5 mm bit
Side cutter
Electrical pliers
11
12
Tools
Step 1
Removal of door paneling for 4-door automobiles
Tip: Before beginning – Shut-off ignition
and all electrical devices
For mechanical window regulator:
Open door lock (A) according to arrow and remove
window crank
Removal of door paneling for 4-door automobiles
Illu. 1
Illu. 2
Illu. 3
Abb. 4
Tip: If standard loudspeakers are
already installed be careful of the plug
connections of the already existing
tweeters when you remove the door
p a n e l i n g . L o o s e n t h e p l u g .
The door paneling is fastened with clips
(arrows). Carefully pry off the paneling,
beginning at the lower inner corner working
your way upward (illustration 4). Then pry the
paneling carefully out of the window slot.
Loosen the door opening cable. For this purpose press the 2 flaps of the clamp together
and remove the clamp. Unhook the knob of the door opening cable. Pry possibly
remaining clips out of the door and re-insert them in the paneling.
Carefully pry off the lower grip cover (2) (illustration 2) and remove the 2 screws (Torx 30)
underneath. (illustration 3)
A
