www.uovisioneurope.com
Quick Start
1. Load 12pcs of the new AA alkaline batteries
or connect 6 V external power supply. If external power
used, the batteries can be inside the camera at the same
time
2. Insert the SD card (32GB or smaller) and SIM card
(Wireless cameras ONLY). Be sure that the PIN of the SIM
card is disabled; (You can disable the PIN of a SIM card via
your service provider.) (Wireless cameras ONLY)
3. Slide the power switch to the “SETUP” position to set up
the camera;
Note: When going into the setup mode, allow
approximately 10-20 seconds for the camera to
acquire a signal.
4. Press the “MENU” button to enter into the program menu,
then press the “up” or “down” arrow buttons for parameter
settings as described in the user’s manual. Press the “OK”
button to save parameter settings and exit;
5. Place the camera at the target area and turn on the
camera
（
slide the power switch to “ON”
）
, the camera will
take pictures or videos as preset in step 4;
6. Press the “ ”
button to capture photos or record a
video manually;
7. Press the “ ” button to playback the pictures. Use the
“up” or “down” arrow buttons to scroll through pictures on
the color monitor;
