Page
10
5.
2
PIR
TAB
Trigger Mode
: Choose if you want PIR triggered footage, Timelapse triggered footage or Both.
PIR Sensitivity:
Choose between Low / Auto or High PIR sensitivity
PIR Interval
:
This is the time delay of the PIR sensor to set after each trigger & transmission (for security
applications its best to have a short time setting). This setting prevents the SD card from filling up with too
many redundant images.
Time lapse
:
When you choose time lapse, the camera will automatically take photos or videos at user-set
interval times - even when it is not triggered by the PIR sensor. It’s useful for the constant monitoring of
an area - or for an area that is beyond the range of the PIR sensor.
Work Time1-4
:
You can set the camera to automatically work at preset times and even on preset days.
Outside of these pre-set times the camera will not work. Work hour: 00:00-00:00 means 24 hours. If the
settings is cross the day, for example: Start: 20:00 Stop: 10:00 means 00:00-10:00 am and 20:00-24:00
of the chosen day.
Work Time
cont.
The camera can just work at a preset time and preset days. In the rest of the time the camera is under
standby mode.
There are four work time can be set.
