Unverferth UM410 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 104

Unverferth UM410 Скачать руководство пользователя страница 48

Scales - Models 410 and 520

— Operation & Maintenance

3-2

Wheel, Hub and Spindle Disassembly and Assembly

• TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH. BE

SURE MACHINE IS SECURELY BLOCKED.

•

FALLING  OBJECTS  CAN  CAUSE  SERIOUS  INJURY  OR  DEATH.    DO  NOT  WORK  UNDER  THE
MACHINE AT ANY TIME WHILE BEING HOISTED.  BE SURE ALL LIFTING DEVICES AND SUPPORTS
ARE RATED FOR THE LOADS BEING HOISTED. THESE ASSEMBLY INSTRUCTIONS WILL REQUIRE
A SAFE LIFTING DEVICE PER MODEL LISTED IN SAFE LIFTING DEVICE WEIGHT CHART BELOW.
SPECIFIC LOAD RATINGS FOR INDIVIDUAL LOADS WILL BE GIVEN AT THE APPROPRIATE TIME

IN THE INSTRUCTIONS.

•

EYE PROTECTION AND OTHER APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT MUST BE
WORN WHILE SERVICING IMPLEMENT.

•

KEEP HANDS CLEAR OF PINCH POINT AREAS.

• IMPROPERLY TORQUED WHEEL NUTS/BOLTS CAN CAUSE A LOSS OF IMPLEMENT CONTROL

AND  MACHINE  DAMAGE.    TORQUE  WHEEL  NUTS/BOLTS  TO  VALUES  IN  TABLE.    CHECK
TORQUE  BEFORE  USE,  AFTER  ONE  HOUR  OF  UNLOADED  USE  OR  AFTER  FIRST  LOAD,
AND EACH LOAD UNTIL WHEEL NUTS/BOLTS MAINTAIN TORQUE VALUE.   CHECK TORQUE
EVERY 10 HOURS OF USE THERE-AFTER.  AFTER EACH WHEEL REMOVAL START TORQUE
PROCESS  FROM  BEGINNING.    WARRANTY  DOES  NOT  COVER  FAILURES  CAUSED  BY  IM-
PROPERLY  TORQUED  WHEEL  NUTS/BOLTS.

• Remove only one wheel and tire from a side at any given time in the following procedure.

1. Hitch cart to tractor. Park the empty cart on a firm, level surface. Set

the tractor’s parking brake, shut off engine and remove key.

SAFE LIFTING DEVICE WEIGHT

Brent Models:

472, 572, 576, 678

12,000 Lbs.

774, 776, 780, 782, 874,
876, 880, 882, V700, V800

16,000 Lbs.

1080, 1082, 1182, 1282,
1596, 2096, V1000, V1100,
V1300

24,000 Lbs.

Unverferth Models:

760, 860, 1060

16,000

1110, 1160, 5225, 6225,
7250, 8250, 9250

20,000 Lbs.

1015, 1017, 1050, 1115,
1117, 1310, 1315, 1317,
1120, 1320

24,000 Lbs.

SAFE LIFTING DEVICE WEIGHT

Killbros Models:

735, 835

12,000 Lbs.

1150, 1160, 1175, 1185,
1195

20,000 Lbs.

1035, 1135

14,000 Lbs.

1950

16,000 Lbs.

1113, 1313

24,000 Lbs.

Parker Models:

742, 842

12,000 Lbs.

524, 624, 739, 839, 1039

20,000 Lbs.

1042, 1142

14,000 Lbs.

1154, 1354

24,000 Lbs.

«
...
46
47
48
49
50
...
»

Содержание UM410









































































































Отзывы:

Нет отзывов