manualshive.com logo in svg

Unverferth MAXIMUS 100, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Unverferth MAXIMUS 100 Скачать руководство пользователя страница 25

-25-

oPTIoNAl blADE CoVERS

(#71805b, 72931b, 72939b)

Unpack blade covers, separate, and identify 

all components according to page 34 of the 

PARTS section.

 

CAUTIoN!  USE CARE WhEN WoRKING 

 

NEAR DISK blADES.  ThE EDGES ARE 

ShARP AND CAN CAUSE PERSoNAl INjURy.  

WEAR GloVES AND oThER PRoTECTIVE 

CloThING To AVoID hARM.

Blade covers will mount on the front and rear 

side of each gang under the bearing standards 

(Fig. 3-9).

fRoNT GANGS

Remove the locknut (9802) from the 3/4-10 x 4 

1/2 capscrew (9390-154) on the inner bearing 

standard. Mount scraper bar (72981B) to the 

inner bearing standard and secure with the 

previously removed 3/4-10 locknut (9802) and 

1/2-13  x  1  1/2  capscrew  (9390-101),  flat  washer 

(9405-088), and locknut (9800).

REAR GANGS

The assembly is similar to the "FRONT GANGS" 

except for the inner and outer bearing standards 

are reversed.
Optional blade covers (71805B, 72931B, 72939B) 

may be installed in combination with the blade 

scrapers. In this case, scrapers should be in-

stalled  first,  followed  by  the  blade  covers.  Blade 

covers will then mount to the underside of the 

scraper brackets (72981B, 72980B, and 72979B).

oM-04313

fIG. 3-9

ASSEMBLY

REVERSE DISKING

The assembly is similar to that for "NORMAL 

DISKING" except the mounting bars will mount 

on the normal front-side of the disk gangs (Fig. 

3-6 & 3-8).

10.  When reverse disking, the scrapers must 

be installed to the front-side of the gangs 

for proper function. Reverse disking with 

the scrapers installed for "NORMAL DISK-

ING"  may result in poor performance and 

machine damage.

Optional blade covers (71805B, 72931B, 72939B) 

may be installed in combination with the blade 

scrapers. In this case, scrapers should be in-

stalled  first,  followed  by  the  blade  covers.  Blade 

covers will then mount to the underside of the 

scraper brackets.

4-blade Assembly Shown

5-blade & 4/5 blade Assemblies Are Similar

REVERSE DISKING SCRAPERS 

SHOULD BE INSTALLED ON THE 

FRONT-SIDE OF GANGS

fIG. 3-8

(May 2015)

Содержание MAXIMUS 100























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды