![background image](http://html1.mh-extra.com/html/unova/intermec-easycoder-501/intermec-easycoder-501_installation-instructions-manual_1060333003.webp)
EasyCoder 501/601 – Installation Instructions
2
Continued!
DUAL SERIAL INTERFACE KIT, cont'd.
Step-by-Step Installation
Instructions
Communication
Port "uart1:"
Cover Plate
Power
Switch
Power Cord
Receptacle
The only tool required is a Torx #T10 screwdriver.
❑
Turn off the power and remove the power cord.
❑
Remove the communication cable from communication port
"uart1:".
❑
Open the right-hand door.
❑
Remove the eight Torx screws that hold the cover over the left
part of the printer (see illustration below).
❑
Remove the cover.
Screws (4x)
Cover
0
230V
Screws (4x)
All manuals and user guides at all-guides.com