4
Docking Procedures
Note these four items in the illustrations below: (1)
alignment recesses
, (2)
alignment
wedges
, (3)
gripper
, (4)
dock latch
. Follow these instructions to successfuly dock your
6640 Computer:
DOCKING
:
1. Place alignment recesses
(bottom of the computer)
onto the wedges
(top of dock).
2. Tilt computer upright against the gripper, press firmly until it clicks into place.
3. Press the dock latch firmly inward and slightly downward until it latches.
4. You may use the keylock to discourage theft or tampering.
DOCK RELEASE
:
(a) Raise UP on the dock latch.
(b) Pull top of computer away from the gripper.
(c) Lift the computer UP, off the alignment wedges.
1. Alignment recesses (bottom of computer)
2. Alignment wedges
3. Gripper
4. Dock latch
1
2
3
4
