2
Introduction
These instructions provide useful information for installing and using the 6640 Vehicle
and InĆPremise docks. Numerous threaded inserts are provided on both the rear and
bottom of these docks to accomodate existing mounting device hole patterns. These deĆ
vices can be ordered through your Intermec sales representative, or you may use the inĆ
formation and dimensions in obtaining mounting devices from a thirdĆparty supplier of
your choice.
As you plan each installation, there are several basic concepts you must keep in mind:
"
Allow clearance for docking and undocking the computer
"
Allow clearance for adjusting the dock angle and height
"
Allow clearance for making cable connections to the dock
Available Mounts
The mounts shown below are available through your Intermec sales representative.
Mounting devices for the 6640 may vary slightly in appearance from these illustrations.
RAM Mount
various base, adapter
plates, and pedestal
sizes available
Panavise Mount
several pedestal
heights are available
Contents
These instructions show you the following:
"
The basic mounts available from Intermec Technologies Corporation
"
Connector locations on the 6640 docks
"
How to dock and undock a 6640 computer
"
Various mounting hole dimensions, spacing, and specifications
Pedestal Adapter Bracket
designed to adapt 6640 docks
to mount on a custom pedestal
