Unold 86515, Инструкция по эксплуатации

Страница: 16 / 52

16
the appliance is very hot during and after operation - danger of burn injuries!
do not use timers or other external switch-on / switch-off systems to operate the appliance.
use of such items could unintentionally reset the overheating protection circuit and cause
a fire hazard.
to prevent overheating and the associated fire hazard, never cover the appliance during
operation.
do not operate the appliance in the vicinity of sinks, bathtubs or other containers filled
with water.
TiLT proTecTion
When you lightly shake the
appliance you will hear a noi-
se coming from the interior of
the appliance. This is caused
by the tilt protection techno-
logy used; there is no defect
in the appliance!
The tilt protection switches the appliance off
immediately, as soon as the appliance tilts to
a position where safe operation is in jeopardy.
THe iDeaL LocaTion
beFore uSing THe appLiance THe FirST Time
1. Maintain an adequate safety distance (at
least 1 meter) to other objects, such as fur-
niture, curtains, etc.
2. Only place the appliance in operation in a
vertical position.
3. Ensure that air can flow in and out unhinde-
red - do not, under any circumstances, cover
the air inlets of the appliance.
4. Only place the appliance on a solid and level
substrate. Do not place the appliance on
soft surfaces (sofa, bed) because the appli-
ance can tip over.
5. In addition, ensure that the appliance is not
set up on deep-pile carpets or in dusty envi-
ronments.
6. Never place the appliance directly under an
electrical outlet, and ensure that the power
socket used is easily accessible at all times.
7. Check whether the power cord is routed in
such a manner that no one can stumble over
it.
8. The power cord should not touch any
housing parts, this could cause the cable to
melt.
Be aware that the appliance can be-
come very hot - fire hazard! Particular-
ly ensure that children are kept away
from the appliance.
1. Remove all packaging materials and any
transport safeguards.
2. Check whether all listed accessory parts are
present and intact.
3. On the base/foot, unscrew the fixing screw
and take it down.
4. Fit the glass plate on the axle. In this pro-
cess, note that the base feet on the glass
plate must point downward (away from the
device).
5. Refit the fixing screw and firmly tighten it.
6. Select a location for the appliance, strictly
comply with the instructions in the following
chapter in this regard.
7. When you use the appliance for the first
time, or if it has not been operated for an
extended period of time, a slight odour can
occur.
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.