40
USO
1. Rimuovere il coperchio dal contenitore in vetro sollevandolo verso l’alto.
2. Ora è possibile mettere in funzione l’apparecchio con o senza filtro per il tè. Se si desidera
solamente scaldare l’acqua, staccare il colino dal coperchio svitandolo in senso orario e quindi
conservare il colino con cura. Se invece si desidera preparare il tè, rimuovere il colino come
descritto e versarvi la quantità di tè desiderata. Fissare il colino sul lato inferiore del coperchio
avvitandolo in senso antiorario.
3. Riempire con la quantità desiderata di acqua fredda pulita. È necessario versare almeno 0,5 litri
d’acqua, la quantità di riempimento massima è di 1,5 litri.
4. Applicare il coperchio sul contenitore in vetro con una leggera pressione. Fare attenzione che
il coperchio sia posizionato correttamente facendo riferimento alla marcatura presente sullo
stesso.
5. Collegare la base alla rete elettrica (220–240 V~, 50/60 Hz) mediante il cavo di alimentazione.
6. Non appena l’apparecchio è collegato alla rete elettrica la spia di controllo rossa inizia a
lampeggiare.
7. Accendere l’apparecchio tramite il tasto ON/OFF.
8. Selezionare la temperatura dell’acqua desiderata mediante il relativo tasto. L’apposita spia di
controllo si illumina e l’apparecchio riscalda l’acqua.
9. L’apparecchio porta l’acqua a ebollizione. Non appena il processo è terminato viene inviato un
triplice segnale acustico.
10. Se l’apparecchio non è spento per mezzo del tasto ON/OFF, tiene calda l’acqua per massimo 2
ore. L’acqua è nuovamente riscaldata non appena scende al di sotto della temperatura impostata.
11. E’ possibile interrompere il processo di bollitura in qualunque momento premendo il tasto ON/
OFF.
12. Se si desidera riscaldare nuovamente l’acqua, lasciar raffreddare l’apparecchio per qualche
minuto.
13. L’acqua bollente può causare ustioni. Pertanto quando l’apparecchio contiene acqua calda va
maneggiato con estrema cautela.
14. L’apparecchio è dotato di una protezione dai funzionamenti a secco. In caso di funzionamento
senza acqua o di eccessiva presenza di calcare la protezione dai funzionamenti a secco disattiva
l’apparecchio. In questo caso lasciar raffreddare brevemente l’apparecchio prima di riempirlo
nuovamente con acqua oppure decalcificarlo come illustrato nel capitolo „Decalcificazione“.
Copyright UNOLD AG | www.unold.de
Содержание 18570
Страница 58: ...58 Copyright UNOLD AG www unold de ...
Страница 59: ...59 Copyright UNOLD AG www unold de ...
Страница 60: ...Aus dem Hause Copyright UNOLD AG www unold de ...