P a g e
| 9
Electric Combination Boiler User Manual
1- Summer mode set point
5- Operating heater stages
9- Room thermostat is active
2- Winter mode set point
6- Pump working
10- Water temp. in the device
3- Clock
7- Three way valve is open
4- Pressure in the device
8- DHW is open
START-UP
Check the electrical connections before the boiler is switched on for the first time. Check the cable
cross sections and fuses that are suitable for the boiler (see Table I).
Check the boiler water level and pressure, check all connections and pipes for leaks. Do not add
water if the boiler is cold.
To operate in winter;
Press the button
to set the desired temperature with
the button. The temperature
you set will self-record after 5 s.
Press the button
to start the operation of the device. When the winter mode button is
active, the led light will be on.
You can also adjust the operating temperature by pressing the button
, you can get hot
water when the tap is opened even if the appliance is in winter mode.
To operate in summer;
Press the button
to set the desired temperature with the buttons
. The temperature
you set will self-record after 5 s.
