background image

12

INSUTE202NP1215

LIMITED W

ARRANTY

 LIMITED W

ARRANTY

 LIMITED W

ARRANTY

 LIMITE

LIMITED W

ARRANTY

 LIMITED LIMITED W

ARRANTY

 LIMITED W

ARRANTY

LIMITED WARRANTY

This unit has a 2-year warranty. If 
at  any  time  during  this  period  the 
unit becomes defective, it must be 
returned  to  its  place  of  purchase 
with  the  invoice  copy,  or  simply 
contact  our  customer  service 
department (with an invoice copy in 
hand). 

In order for the warranty 

to be valid, the unit must 
have been installed and used 
according to instructions.

  If  the 

installer  or  the  user  modifies  the 
unit,  he  will  be  held  responsible 
for  any  damage  resulting  from 
this  modification.  The  warranty  is 
limited  to  the  factory  repair  or  the 
replacement of the unit, and does 
not cover the cost of disconnection, 
transport, and installation.

E-mail: [email protected] 

Web site: www.stelpro.com

LIM

IT

ED

 W

AR

RA

NT

Y L

IM

IT

ED

STELPRO DESIGN INC. | Saint-Bruno-de-Montarville | Québec  | J3V 6L7

SUPPLY VOLTAGE:

120/208/240 VAC, 50/60 Hz

MINIMUM ELECTRICAL CURRENT 
WITH A RESISTIVE LOAD:

1.25 A

150 W @ 120 V

260 W @ 208 V

300 W @ 240 V

MAXIMUM ELECTRICAL CURRENT 
WITH A RESISTIVE LOAD:

8.3 A 

1000 W @ 120 VAC

1730 W @ 208 VAC

2000 W @ 240 VAC 

TEMPERATURE DISPLAY RANGE:

0 °C to 40 °C (32 °F to 99,5 °F)

TEMPERATURE DISPLAY 
RESOLUTION:

0.5 °C (0.5 °F)

TEMPERATURE SET POINT RANGE:

3 °C to 30 °C (37 °F to 86 °F)

TEMPERATURE SET POINT 
INCREMENTS:

0.5 °C (1 °F)

STORAGE TEMPERATURE:

-40 °C to 50 °C (-104 °F to 122 °F)

TECHNICAL SPECIFICATIONS

Содержание UTE202NP Series













Отзывы: