uniview technologies Uniarch IPC-B112-PF40, Руководство пользователя

Страница: 36 / 42

31
APR Protection
This function protects a camera from ARP attacks. The gateway and the MAC address must be set properly
before a PC can access the camera from another network; if an incorrect MAC is set, only PCs on the same
LAN can access.
NOTE!
This function is not supported by some models. Please see the actual model for details.
1. Click Setup > Security > Network Security > ARP Protection .
2. Select the check box to enable the ARP binding function and set the gateway MAC address.
3. Click Save .
IP Address Filtering
Use IP address filtering to allow or forbid access from specified IP address (es).
NOTE!
This function is not supported by some models. Please see the actual model for details.
1. Click Setup > Security > Network Security > IP Address Filtering .
2. Select On to enable IP address filtering.
3. Select a filtering mode, and then add IP address (es).
4. Click Save .
NOTE!

If Filtering Mode is set to Whitelist , then only the added IP address (es) are allowed to access the
camera. If Filtering Mode is set to Deny Access , then only the added IP address (es) are not allowed
to access the camera.

Up to 32 IP addresses are allowed. Each IP address can be added once only.

The first byte of each IP address must be 1-223, and the fourth cannot be 0. For example, the
following IP addresses are illegal and cannot be added: 0.0.0.0, 127.0.0.1, 255.255.255.255,
224.0.0.1.