Univex Upasta-01, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 14

8
8
9
4
5
6
7
2
1
3
Pasta maker die assembly
After you have assembled the pasta production components, assemble the die, choosing it based on the desired product:
- fit the pasta maker die (1) with the ring nut (2)
- manually tighten the ring nut to the pasta maker as shown in the figure
- further tighten the ring nut to a halt with the relevant wrench (3)
Pasta maker die assembly
Pasta cutter blade assembly
This accessory can only be used with the pasta maker die.
- Assemble the blade (4) on the shaft of the blade unit, as shown in the figure
- make sure the locking device (5) is lifted
- fit the fixing pin (6) of the blade unit in its seat (7)
- lower the locking device (5) to fasten the unit
- engage the power connector (8) as shown in the figure.
Blade rotation speed, which determines product length, is adjustable using the potentiometer (9).
Pasta cutter blade assembly