Univex Upasta-01, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 14

5
2. Machine transport, handling and warehousing
Packing
Machine packing consists of a wooden crate. To correctly handle the crate, use a forklift or pallet transporter.
ALL TASKS TIED TO MACHINE HANDLING, TRANSPORT AND WAREHOUSING MUST BE CARRIED OUT BY
SPECIALIZED PERSONNEL AND IN FULL COMPLIANCE WITH THE LEGISLATION AND STANDARDS APPLICABLE
IN THE COUNTRY WHERE THE MACHINE IS INSTALLED.
BEFORE YOU UNPACK THE MACHINE, BE SURE TO CHECK THE PACKING IS INTACT AND INFORM CUSTOMER
SERVICE OF ANY UNUSUAL FLAWS.
Open machine packing
Unpacking
Open the packing and check that the pasta maker is perfectly intact.
Then, remove the pasta maker from its packing and proceed to position it for installation.
IF THE MACHINE INCLUDES PACKING, THE OPERATOR MUST STORE IT OVER THE MACHINE'S ENTIRE LIFE
CYCLE, IN ORDER TO REUSE IT WHENEVER HANDLING THE MACHINE AFTER ITS INSTALLATION.
IF THE MACHINE DISPLAYS DAMAGE PRIOR TO UNPACKING OR AT ANY RATE PRIOR TO ITS HANDLING,
PROMPTLY INFORM CUSTOMER SUPPORT TO RECEIVE CLARIFICATIONS.
We recommend that you store the packing for future transport tasks.
Handling the pasta machine
DURING HANDLING, THE OPERATOR MUST PLACE THE UTMOST ATTENTION TO AVOID THE MACHINE FROM
TIPPING OVER.
HANDLE THE MACHINE ONLY WHEN IT IS NOT RUNNING AND IS DISCONNECTED FROM ALL ITS POWER
SUPPLIES.
Positioning and leveling the pasta maker
The machine is capable of operating in outdoor premises at temperatures from +5°C to +35°C and with a humidity of up to 9'% without
condensation.
After having placed the pasta maker in the desired position, level it with the ground by working on the adjustable supports indicated in
the figure.
INSTALL THE PASTA MAKER SO THAT IT HAS ENOUGH SPACE AROUND IT FOR THE OPERATOR TO WORK
AND ASSEMBLE/DISASSEMBLE THE ACCESSORIES IN TOTAL SAFETY. MOREOVER, PROVIDE SUFFICIENT
LIGHTING FOR INSTALLATION.