6 of 11
Electric Connection
The electric connection is to be carried out by a skilled electrician, in compliance
with the procedures, state/local codes and the regulation in force in the country of
installation. Make sure that the voltage and the frequency of the equipment are the
same of the identification plate of the machine. Damage to the machine resulting
from incorrect electrical connection will void all warranties.
DO NOT REMOVE OR TAMPER THE PROTECTIONS AND
THE ELECTRICAL AND MECHANICAL SAFETY DEVICES
THAT THE MACHINE IS PROVIDED WITH.
SETTING UP THE T50
To open the machine, lift the upper cover (1) which, by rotating (2) and placing it in the proper compartment
(3), becomes an upper chute Open the lower belt (4) and press the general switch from the “0” position to
the “I” position. The machine is now operational.
The cover become the
upper chute
1
2
3
Open the lower chute
4
