6.2 - Preparing the blade cartridge
The machine can be configured with 2 different meat processing rollers:
1 - Tenderising rollers
2 - Cutting rollers
- The “tenderising” system is made up of star-shaped
blades (Fig. 6.2.1) that penetrate the meat and curt the
nerves so as to make it more tender.
- The “strip-cutting” system is made up of round blades
(Fig. 6.2.2) paired with one another that cut the meat into
strips; strips of different thickness can be obtained by
varying the thickness of the spacers.
- To insert the blade roller, turn the blade cartridge knob so
that the slot opens (position “1” Fig. 6.2.3 – the knob will
click slightly).
- Insert the roller by gripping it from the ends.
Do not touch
the blades with your hands
- Turn the cartridge knob in the opposite direction to lock
the roller (position “2” Fig. 6.2.3 – the
knob will click slightly).
- Insert the scraping combs (Ref. 3 Fig.
6.2.4).
- Move the cartridge using the handle (Ref.
4 Fig. 6.2.3).
6.3 - Automatic version
-
Raise the interlocked blade guard (Ref. 4 Fig.
6.4.1).
-
Place the cartridge on the bars of the base
(Ref. 1 Fig. 6.4.1).
-
Turn the cartridge lever (Ref. 5 Fig. 6.4.1) so
that the blade roller pins insert into the drive
pins, until they slot into place.
-
Close the interlocked blade guard (Ref. 4 Fig.
6.4.1).
-
Press the controls (Ref. 3 Fig. 6.4.1) to switch
the machine on or off.
-
Take the product with two hands and insert it
into the loading mouth; use the pestle if the
product gets jammed.
CAUTION:
Handle the blade cartridge always through
the appropriate handle (Ref. 2 Fig. 6.4.1) and
protect the hands with Kevlar cut-resistant
gloves.
7 - Maintenance
7.1 - Instructions
CAUTION!
Maintenance and cleaning must always be carried out with the machine at a standstill
and disconnected from the mains power supply.
Always keep the maintenance zone clean and dry.
Do not allow unauthorised persons to intervene on the machine.
Parts and tools must be replaced using original spare parts at authorised service
centres, or directly by the manufacturer.
7.1 - Lubrication
The machine does not require any lubrication.
7.2 - Cleaning the machine
CAUTION!
Disconnect the machine from the mains power supply before cleaning it.
Do not clean the machine using a water jet.
Fig. 6.2.2
Fig. 6.2.1
Fig.
6.2.3
1
2
3
4
Fig.
6.4.1
3
4
2
5
1
Fig.
6.2.4
4
2
5
3
1
