Gas burning pizza brickoven
R-001 100518
Page 16 of 33
Tighten firmly all the parts of
the standing support.
Once the standing support
has
been
assembled,
position the structure in the
area where the oven will be
installed.
The red panel shows the
side where the oven's door
will be positioned.
Load
the
oven's
body
inserting the forks as shown
in the figure (see green
rectangles, close to the
oven's standing feet).
The
incorrect
positioning of the
forks can severely
damage
the
equipment.
DO NOT
insert the forks in
the area marked in red in
the figure above.
After
reaching
the
installation position, lift the
oven up to a working height
for the correct positioning on
the standing support.
Align the standing support's
verticals under the oven's
standing feet with simple
manual operations.
Lower the oven till it lays
completely on the standing
support's verticals.
Standing feet
