LUBRICATION & FUNCTION CHECK
Warning
:
Turn off slicer and
DISCONNECT ELECTRICAL CORD
before lubricating and
close fence all the way.
General lubrication should be performed in accordance with the lubrication instructions below.
During this lubrication sequence, be sure to check for free operation and movement of related
parts as well as for excessive wear and looseness of various parts. Be sure to check all handles
and knobs for tightness. Never use any type of vegatable cooking spray or oil as lubrication as
this will cause damage to your slicer.
Lubrication Instructions:
A
= Clean and apply mineral oil weekly.
B
= Apply Petro-Gel (4400408) as often as required to maintain a light film.
Remove the 3 bottom cover screws and 4 rubber feet to
gain access to the slice adjustment and carriage slide rod.
A
A
A
B
B
B
Figure 10
Figure 11
Figure 12
Page 10
