universalblue UBE2406-21, Руководство пользователя

Страница: 56 / 82

56
6. USING YOUR INDUCTION HOB
To start cooking

Touch the ON/OFF control.

After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indicating that the induction hob has
entered the state of standby mode.

Place a suitable pan on the cooking zone that you
wish to use.

Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.

Touching the heating zone selection control, and a
indicator next to the key will flash

Set a power level by touching the “-”, “+”, slide along the
“—”control, or just touch any point of the “—”.

If you don’t select a heat zone within 1 minute, the
induction hob will automatically switch off. You will need
to start again at step 1.

You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat setting
This means that:

you have not placed a pan on the correct cooking zone or,

the pan you’re using is not suitable for induction cooking or,

the pan is too small or not properly centred on the cooking zone.