Ref. Part # Description
Ref. Part # Description
Replacement Parts for UT8962-17
UT8962-17
UT8962-17
PUSH TO START
AUTO SHUTOFF SCREWDRIVER
Limited Warranty
Universal Tool warrants its tools to be free from defects in material and workmanship for one year from the date of
purchase. This warranty does not apply to tools which have been abused, misused, modified or repaired by
someone other than Universal Tool or its authorized service centers. If a Universal Tool proves defective in
material of workmanship within one year after purchase, return it to any authorized service center or to Universal
Tool, freight prepaid. Please enclose your name, address and adequate proof of purchase date with a brief
description of the defect. Universal Tool will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period. Universal Tool's sole
liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective tool.
There are no other warranties expressed or implied and Universal Tool shall not be liable for incidental, consequential
or special damages, or any other damages, costs or expense of repair or replacement as described above.
Drive size .. ..........................................1/4" QC
Free speed (No load)......................1700 RPM
Torque (green spring) ....................5-19 in/lbs.
Torque (black spring) .................. 10-38 in/lbs.
Torque (yellow spring) ................. 15-45 in/lbs.
Weight .... ..............................................1.5 lbs.
Overall length .... ......................................8.65"
Average air consumption ......................4 CFM
Recommended hose size . ...................3/8" I.D.
Air inlet . ..............................................1/4" NPT
Maximum operating pressure ........ .........90 psi
PUSH TO START
AUTO SHUTOFF SCREWDRIVER
Clutch Adjustment
Clutches are adjusted through the slot
provided in the clutch housing. The slot
cover must be rotated to expose the
adjustment slot. Rotate (fig.58) the
clutch housing until the hole in the
adjustment nut is visible. Insert a No.1
Phillips screwdriver and rotate in a
clockwise direction to increase torque
setting or in a counter clockwise
direction to decrease the setting. After
each adjustment, the slot cover should
be rotated back to its locked posistion
1
9AS00501
MOTOR HOUSING
2
961249
PIN
3
9AS00503
AIR INLET
4
9AS00510
SHUT-OFF VALVE
5
9AS00509
SHUT-OFF VALVE SEAT
6
9AS00530
REVERSE VALVE
7
9706107
O-RING (2)
8
9AS00508
SHUT-OFF VALVE SPRING
9
9OR02500100
O-RING
10
9AS00521
REVERSING VALVE KNOB
11
9000070
SPRING PIN (1.6X10)
13
9000022
BALL BEARING (R3-ZZ) (2)
14
9000023
END PLATE
15
9AS00415
ROTOR
16
9000025
ROTOR BLADE (4)
17
9000026
SPRING PIN (1.5X6L)
18
9000027
CYLINDER
19
9000028
FRONT END PLATE
20
9AS00420
MOTOR SPACER
21
9AS20534
PUSH NEEDLE
22
9AS00422
INTERNAL GEAR
23
9AS00423
PLANET GEAR (3)
24
9AS00424
PIN (3/32"X18.8) (3)
26
9AS00426
WORK SPINDLE
30
9000039
BALL BEARING (77R6ZZ)
31
9AS00560
CLAMP NUT
32
9AS00550
MUFFLER MATERIAL
33
9AS00507
EXHAUST DIFFUSER
34
9000073
STEEL BALL (1/8”)
35
9000044
CLUTCH
36
9000045
PIN (1/8"X9.6)
37
9000046
RESET PIN
38
9000047
PIN (1/16"X11)
39
9000048
TRIP SLIDE
40
9000049
SPRING
41
9000050
PLUG
42
9000051
INTERNAL RING (RTW-22)
43
9000052
STEEL BALL (3/16") (4)
44
9000053
SPRING
45
9000054
CAM SPINDLE
46
9000055
COVER
47
9000056
BUSHING
48
9000057
C-RING (5103-43)
49
9000058
SPRING (Yellow)
49
9AS000149-12
SPRING (Black)
49
9AS000149-13
SPRING (Green)
50
9000059
THRUST RACE (TRA-815) (2)
51
9000060
ROLLER THRUST BEARING
52
9000061
ADJUSTMENT LOCK RING
53
9000062
ADJUSTMENT NUT
54
9000063
SPINDLE BUSHING
55
9000064
BALL RETAINER
56
9000065
SPRING
57
9000066
WASHER
58
9000067
ADJUSTMENT COVER
59
9AS00559
CLUTCH HOUSING
60
9000069
RETAINING RING(ISTW-11)
61
9000097
SPRING
62
9000071
RETAINER RING
63
9000072
STEEL BALL (3/32") (13)
64
9AS00552
RUBBER GRIP
65
9AS00562
HOOK
66
9AS000163
SCREWDRIVER
67
952235
O-RING
* Optional Part
