Universal Audio 2192 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 55

background image

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by Universal Audio could void the user’s authority to
operate the equipment.

Notice

This manual provides general information, preparation for use, installation and operating instructions for the
Universal Audio 2192.

The information contained in this manual is subject to change without notice. Universal Audio, Inc. makes no
warranties of any kind with regard to this manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Universal Audio, Inc. shall not be liable for errors
contained herein or direct, indirect, special, incidental, or consequential damages in connection with the
furnishing, performance, or use of this material.

Copyright

© 2008 Universal Audio, Inc. All rights reserved.

This manual and any associated software, artwork, product designs, and design concepts are subject to
copyright protection. No part of this document may be reproduced, in any form, without prior written permission
of Universal Audio, Inc.

Trademarks

2192, 1176LN, 2-1176, 6176, LA-2A, 2-LA2, LA-610, LA-3A, 2-610, 710, 4110, 8110, SOLO/110, SOLO/610,
DCS Remote Preamp, UAD and the Universal Audio, Inc. logo are trademarks of Universal Audio, Inc. ADAT® is a
registered trademark of Alesis Corporation. Other company and product names mentioned herein are trademarks
of their respective companies.

Contents of This Box

This package should contain:

•

One Model 2192 Master Audio Interface

•

2192 Operating Instructions

•

IEC Power Cable

«
1
2
3
4
...
»

Содержание 2192
























































Отзывы:

Нет отзывов

Похожие инструкции для 2192

Бренд: Manfrotto Страницы: 2

Бренд: Data Aire Страницы: 82

Бренд: Harken Hoister Страницы: 12

Бренд: Fantasea Страницы: 18

Бренд: Fantasea Страницы: 15

Бренд: GCE Страницы: 16

Бренд: GCC Technologies Страницы: 12

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 6

Бренд: paramondo Страницы: 44

Бренд: IFO Страницы: 12

Бренд: Lamtec Страницы: 18

Бренд: Ladybug Страницы: 33

Бренд: LAUMAS Страницы: 44

Бренд: Natibaby Страницы: 24

Бренд: Narvitech Страницы: 12

Бренд: Oki Страницы: 20

Бренд: PAC Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды