Univers by FTE U4111, Руководство пользователя

Страница: 6 / 38

English
PAG . 6
rev 1.1
STEP 3: TIME CONFIGURATION
It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe
is required by some applications. Please complete following options:
Press the [Menu] key of the remote control for appearing the main menu. Select the “System Setup”
option and confirm pressing [OK].
Once in the “System Setup” option, please select “Time and Timer setting” option and press [OK].
Select “Time” option and press [OK]. Image 5 is watched on the TV. For setting up the time, please
complete:
1. GMT Usage: this option will allow you to select if the date and time will be introduced manually (GMT
Usage: Off) or if you wish to introduce the offset respect GMT manually (GMT Usage: On).
2. GMT Offset: If GMT Usage is On, the offset respect GMT has to be configured depending on your
region or country. Use the [
] keys to choose the offset. Remember that the offset values are
between -12:00 and +12:00
3. Date / Time: In order to introduce manually the time and date. Before these values can be modified,
the automatic control of GMT has to be turned off.
NOTE
: If the current channel provides the correct time information, you will see the current time after
you entered “Time” menu. If the channel doesn’t provide time information, you have to input the date
and time information manually. The most channels support the time signal.
4. Press [Exit] to exit the menu.
STEP 4: MODULATOR OUTPUT CHANNEL CONFIGURATION
It is recommended to setup the modulator output channel before starting to enjoy the receiver, especially
if you are using this output for getting the picture on the TV and mixing it with an existing antenna
signals.
The receiver includes an UHF modulator, allowing connecting a TV set or VCR without SCART
connector. The modulator has an antenna input and the output range is from channel 21 to 69. This
will allow you to mix the existing antenna signals with the output channel generated by the receiver.
The modulator output is factory preset to channel 38. To change this value, please complete following
options:
1. Press [Menu] button and access “System Setup” menu.
2. Select “TV System” menu and press [OK] (Imagen 6).
3. Select “RF Channel” option and change its value using [
].
4. Press [Exit] button to save the changes and exit this menu.
You will also have to tune your TV set accordingly, in order to receive the picture from the receiver
IMAGE 5
QUICK INSTALLATION GUIDE
IMAGE 6