Univers by FTE U4111, Руководство пользователя

Страница: 5 / 38

PAG . 5
English
rev 1.1
- DiSEqC1.1: Use [ ] to switch the options of DiSEqC1.1 switches.
- Positioner: Press [ ] to select between “None / DiSEqC1.2 / USALS”.
- Toneburst: Press [ ] to switch this function “On” or “Off”.
- Polarity: Press [ ] to switch between “Auto / H / V”.
Once the LNB is configured, press [Exit] to save the changes and go to the previous window to conti-
nue configuring the antenna.
3. DiSEqC1.0: Use [ ] to switch the options of DiSEqC switches.
4. On “TP Index” item use [ ] to select the desired transponder.
5. In the “FTA Only” item, press [ to select to scan only free channels or even scrambled channels.
If you select “Yes” it will scan free channels only.
6. In “Scan Channel” item, press [
] to select to scan TV + Radio Channels, or just TV channels
or just Radio channels.
7. In “Scan Mode” item you can select “Auto Scan” to blind scan or “Preset Scan” to scan all preset
transponders.
8. Move the highlight to “Search” and press [OK] button to start scanning. Bars are showing the
progress of the channel scanning in the lower part of the window and the found channels are listed.
You can stop the scan with [Exit] and save the so far found channels.
9. Press [Exit] to exit this menu. A window to confirm the changes will appear.
Multi search
: You can edit the following items (Image 4):
1. On “Satellite” item press [OK] to open the satellite list. Then press [ ] to move the highlight and
press [OK] to mark/unmark and [EXIT] to finish the selection. You can select several satellites in this menu.
At the bottom of the screen you can see the selected satellites. The system will use DiSEqC1.0/1.1,
DiSEqC1.2 and USALS functions to search the marked satellites and scan channels.
2. On “FTA Only” item, press [
] to select scanning of all channels or just scanning of free
channels. If you select “Yes” it will scan free channels only.
3. On “Scan Channel” item, press [
] to select the scanning range from TV + Radio Channels, only
TV channels or only Radio channels.
4. On “Scan Mode” item, you can select “Auto Scan” to make a blind scan or “Preset Scan” to scan all
preset transponders of the selected satellites.
5. Select “Search” and press [OK] to start scanning. In the lower part of the window the progress of
scanning and the found channels are displayed.
6. Press [Exit] to cancel or finish the scanning and saving the found channels.
Main Menu: Selecting this option, the main menu will appear on the TV.
IMAGE 4
QUICK INSTALLATION GUIDE