• If the hob is installed with a side adjacent to a vertical kitchen cabinet, the distance between the
edge of the hob and that of the cabinet side should be a least 150mm. The distance between the back
wall and the rear edge of the hob should be at least 55mm.
Aperture Size
•
The hob is supplied with securing clips.
• To avoid liquid spills penetrating between the hob and the worktop, apply the supplied self-adhesive
sponge seal to the perimeter of the aperture. Do not use a silicone sealer.
• Invert the hob on the worktop adjacent to the aperture before making the electrical connection. This
will ensure sufficient cable length for subsequent servicing.
• Position the hob into the aperture so that the securing clips are compressed between the hob base
and the worktop. (refer to Sketch below).
Electrical Connection
WARNING! Risk of Electric Shock
WARNING! Risk of Fire
IMPORTANT
!
•
This appliance has a ‘Y’ type supply cord connection and must be installed by a licensed Electrician,
who will ensure that the stove is correctly connected and safely earthed.
• The appliance must be earthed as the manufacturer and the seller do not accept responsibility for
any damage due to incorrect installation or electrical connection.
•
Earth leakage - This hob should not be connected through an earth leakage system. Refer to S.A.N.S.
10142
6
