UNITY LAUNDRY SYSTEMS UTS40 Скачать руководство пользователя страница 8

Страница: 8 / 52

Part. 14000001

Rev. 04//2021

SAFETY INFORMATION

ELECTRICAL RISK

Protection guard for electric components.

MECHANICAL RISK

Protection guard for moving parts.

FLAME RISK (only on some machines)

Protective guard for flame.

ACCESS PROHIBITED

HIGH TEMPERATURE RISK

Operate with caution.

Use appropriate protections.

RISK OF INHALING HARMFUL OR

IRRITANT VAPORS

Keep the doors/covers closed.

Use appropriate protection.

RISK OF FALLING

Use proper access and safety methods.

WARNING

Machine installations must comply with minimum specifications

and requirements stated in this Manual. You must comply with any

applicable municipal building codes, water supply requirements,

electrical wiring regulations and any other relevant statutory

regulations. Due to varied requirements and applicable local codes,

this machine must be installed, adjusted, and serviced by qualified

maintenance personnel familiar with applicable local codes and the

construction and operation of this type of machinery. They must also

be familiar with the potential hazards involved. Failure to observe

this warning may result in personal injury, property damage, and/or

equipment damage, and will void the warranty.

IMPORTANT: Ensure that the machine is installed on a level floor of sufficient strength. Ensure that the recommended

clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be

blocked.

0.3 SAFETY DECALS

Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the

operator or service technician.

Use manufacturer-authorized spare parts to avoid safety hazards.

Содержание UTS40



















































Результаты поиска

Содержание UTS40

Отзывы:

Бренды по названию

Популярные бренды

UNITY LAUNDRY SYSTEMS UTS40, Руководство пользователя

Результаты поиска

Содержание UTS40

Отзывы:

Бренды по названию

Популярные бренды