UNITY LAUNDRY SYSTEMS UTS40 Скачать руководство пользователя

Страница: 46 / 52

Part. 14000001

Rev. 04//2021

COIN MECHANISM - VENDED MODEL ONLY

13.11 MAINTENANCE

The cleaning frequency depends on the environment and number of transactions of the coin acceptor. It is recommended to

clean the coin acceptor every six months for normal environment or/and infrequent usage, and every three months for harsh

environment or/and frequent usage.

1. Disconnect the power supply before removing and cleaning the acceptor

2. Remove the coin acceptor from its front panel

3. Open the side cover. Do not overbend the spring by opening it wider than 90 degrees

4. Clean the coin path with a soft brush and wipe it with an alcohol-dampened cloth

5. Do not clean the coin path with oil-based cleaning agent as the residue will prevent or block the IR signal

6. Clean IR Transceiver holes with soft brush or air spray duster

7. Make sure the light reflector at the bottom is clean

8. Reinstall the coin acceptor back to the front panel

9. Reconnect the wire to ensure the coin acceptor is working properly.

Содержание UTS40



















































Результаты поиска

Содержание UTS40

Отзывы:

Похожие инструкции для UTS40

Бренды по названию

Популярные бренды

UNITY LAUNDRY SYSTEMS UTS40, Руководство пользователя

Результаты поиска

Содержание UTS40

Отзывы:

Похожие инструкции для UTS40

Бренды по названию

Популярные бренды