(Used for menu entry. 5 sec. if you hold down, you are logged into the menu.)
(Used for parameter transitions within the menu. Furthermore , the value of the
tension set can be adjusted outside the menu.)
(If the start information from the device parameters is on the panel , the device is
switched to start position with this button.)
(Used to enter device parameters and confirm changing values )
Operation For Tare;
The device must be in a stop position.
The roller should not be the material.
This key needs to be pressed for 5 seconds.
START
ESCAPE
ENTER
5
DEVİCE KEY USER MANUEL
IMPROVE PERFORMANCE WITH OUR TECHNOLOGY
USER GUIDE 2020
UTC02
Tension Control
MENÜ
UP
DOWN
STOP
ESC
.
TARE
((To exit the menu and reset the output voltage when the device is at Stop position.
Esc key 3 sec to reset the output voltage. just hold it down. )
(If the device parameter is on the stop information panel, we take the device to
the stop position with this button.)
