9
Precautions For Safe Use and
Installation
Disconnect all supply voltages before taking any action on the device.
Do not disassemble the device when it is under power.
Do not clean the device with solvents or similar substances. Use only dry cloth to clean
the device.
Check that the connections are correct before starting the device.
Keep signal cables away from contactors, inductive loads and electrical noise-emitting
devices and power-carrying lines.
Mount the device away from the contactor, electrical noise emitting devices and
energy-transmitting lines, which are protected against adverse environmental con-
ditions such as humidity, vibration, pollution and high/low temperature.
To minimize electrical noise, use shielded cable and ground the display
Connect the power supply as shown on page 2. Otherwise, device the connection will
be "out of warranty".
Contact your seller for any questions on your device.
The manufacturer shall not be liable in any way for any unwanted circumstances ari-
sing from the failure to perform the above precautions.
IMPROVE PERFORMANCE WITH OUR TECHNOLOGY
USER GUIDE 2020
UTC02
Tension Control
