background image

 

Z12 ZOOM STEREO MICROSCOPE 

 

 

 

 

 

UNITRON

     

                          

73 Mall Drive, Commack, NY  11725  •  631-543-2000  •  www.unitronusa.com 

17

 

MAINTENANCE 

Please remember to 

never 

leave the microscope with any of the objectives or eyepieces removed and 

always protect the microscope with the dust cover when not in use. 

 
 

 

SERVICE 

UNITRON

®

 microscopes are precision instruments which require periodic servicing to keep them 

performing properly and to compensate for normal wear. A regular schedule of preventative maintenance 
by qualified personnel is highly recommended. Your authorized UNITRON

®

 distributor can arrange for 

this service. Should unexpected problems be experienced with your instrument, proceed as follows: 
 
1. Contact the UNITRON

®

 distributor from whom you purchased the microscope. Some 

problems can be resolved simply over the telephone. 
 
2. If it is determined that the microscope should be returned to your UNITRON

®

 distributor or to 

UNITRON

®

 for warranty repair, pack the instrument in its original Styrofoam shipping carton. If you no 

longer have this carton, pack the microscope in a crush-resistant carton with a minimum of three inches 
of a shock absorbing material surrounding it to prevent in-transit damage. The microscope should be 
wrapped in a plastic bag to prevent Styrofoam dust from damaging the microscope. Always ship the 
microscope in an upright position; 

NEVER SHIP A MICROSCOPE ON ITS SIDE

. The microscope or 

component should be shipped prepaid and insured. 

 
 
 
 

 

LIMITED MICROSCOPE WARRANTY 

This microscope is warranted to be free from defects in material and workmanship for a period of five (5) years for 
mechanical and optical components and one (1) year for LED bulb  and  electrical components from the date of 
invoice to the original (end user) purchaser.  This warranty does not cover damage caused in-transit, misuse, 
neglect, abuse or damage resulting from improper servicing or modification by other than UNITRON

®

  approved 

service personnel.  This warranty does not cover any routine maintenance work or any other work, which is 
reasonably expected to be performed by the purchaser. Normal wear is excluded from this warranty. No 
responsibility is assumed for unsatisfactory operating performance due to environmental conditions such as 
humidity, dust, corrosive chemicals, deposition of oil or other foreign matter, spillage or other conditions beyond the 
control of Unitron Ltd.  This warranty expressly excludes any liability by UNITRON  Ltd. for consequential loss or 
damage on any grounds, such as (but not limited to) the non-availability to the End User of the product(s) under 
warranty or the need to repair work processes.  Should any defect in material, workmanship or electronic 
component occur under this warranty contact your UNITRON

®

  distributor or UNITRON

®

  at (631) 543-2000.  This 

warranty is limited to the continental United States of America.  All items returned for warranty repair must be sent 
freight prepaid and insured to Unitron Ltd., 73 Mall Drive, Commack, NY 11725 – USA.  All warranty repairs will be 
returned freight prepaid to any destination within the continental United States of America. For all foreign warranty 
repairs, return freight charges are the responsibility of the individual/company who returned the merchandise for 
repair.  

 

UNITRON

®

 is a registered trademark of UNITRON, Ltd., Commack, NY 11725 

Содержание Z12



















Отзывы: