PROFILER REVOLUTION LITE (REF. 6701)
9
ADVANCED
SETTINGS
DISPLAY READOUT
EXPLANATION
The
language of the Profiler Revolution can be set to
English, Italian, Spanish or French.
Tap REGION to check to which region/country the
Profiler Revolution is set. To change the
region/country, a hard reset is required (see
instructions above (cfr. REGION/COUNTRY SETTINGS).
Define DC VOLTAGE for the inputs, choose between
12V or 24V. This is a global setting for all inputs, each
input can then be switched between OFF or this value.
(cfr. STEP 2). All countries are set by default on 24V,
except UK which is set by default on 12V.
The filter bandwidth can be changed from -2000 kHz to
0 kHZ in steps of 250 kHz.
This allows you to optimize the bandwidth of your filter.
For instance, a European 8 MHz channel can be
changed from 6 to 8 MHz. The default setting is -1000
kHz, which is an optimal setting in 95% of the cases.
Tap FW VERSION to check the firmware version of the
device.Tap SERIAL NUMBER to check the serial number
of the device. To format the SD CARD, tap FORMAT
CARD.
SD
CARD
SETTINGS
DISPLAY READOUT
EXPLANATION
To upload settings from a SD card, tap LOAD SD
PRESET. This will copy the configuration file from the
SD CARD to the device.
To save the device settings on the SD CARD, go to
SAVE SD PRESET and tap on CREATE PRESET.
It is possible to create multiple presets. Therefore, tap
CREATE PRESET after each modification of the settings.
To delete all presets, press DELETE ALL.
