PROFILER REVOLUTION LITE (REF. 6701)
8
To delete a (pair of) channel(s), position the arrow on the
channel and press the rotary button 3
seconds.
DISPLAY READOUT
EXPLANATION
To delete a (pair of) channel(s), position the arrow on
the channel and press the rotary button 3 seconds.
When you have added all the channels to INPUT V/U 1,
and you want to add channels to the other inputs,
scroll up to the top of the menu (to INPUT V/U 1), tap
the button and scroll to the next input.
Repeat the previous steps for all input channels.
OUTPUT
SETTINGS
DISPLAY READOUT
EXPLANATION
Define the OUTPUT LEVEL of the output signal.
Range between 88 dBµV and 108 dBµV (default output
level is 105 dBµV). Check the output via a network
analyser on the -30dB test port.
Note: The more channels you select, the less input
power you should
give (e.g. 99 dBµV for 10 channels).
A SLOPE of up to -15dB can be set between the
beginning of BIII and the end of UHF to compensate for
cable losses. 0dB means all channels have the same
output level (see previous display readout), -15dB
means the beginning of BIII (174MHz) is 15dB weaker
than the end of UHF.
VHF ATTN: To compensate for cable losses, an
attenuator of up to 15 dB can be configured to
decrease the VHF and DAB output level (compared to
the UHF output level).
Note
: In the OUTPUT menu,
you define the output level in dBµV of the MUX’s. The Profiler
Revolution has enough gain to guarantee this output level under all input conditions. In case a
slope has been set, the output level indicated on the display will be the output level of the
highest frequency MUX.
