PROFILER REVOLUTION LITE (REF. 6701)
6
DISPLAY READOUT
EXPLANATION
To activate the correct channel frequency plan, select
the
country
or
region
where the Profiler Revolution
Lite is situated. Rotate to select and confirm by tapping
the rotary button.
The default setting is Europe. The Profiler Revolution
Lite is also operational in the following
countries/regions: Australia, Brazil, China, Hongkong,
Italia, New-Zealand, Russia, South Africa, UK and USA.
All the following menu items can be accessed without the reset procedure.
Push the rotary button for 2 seconds to access the menu
INPUT
SETTINGS
DISPLAY READOUT
EXPLANATION
Tap the rotary button to enter the INPUT FM menu.
Rotate the button to navigate through the submenu.
To filter and amplify an FM signal, tap GAIN, select the
gain of the input FM signal (15 to 35 dB) and tap to
confirm.
Remark: DAB should be added via V/U input 1-4.
After INPUT FM is configured, scroll up to the top of the
menu (INPUT FM), tap the rotary button and scroll
right to INPUT V/U 1. Tap INPUT V/U 1 to enter the
menu to configure input 1.
Rotate the rotary button to scroll down in the submenu
of INPUT V/U 1.
PRE-AMPLI: The internal amplifier is by default ON,
only in case of very strong incoming signals (if the
strongest channel on that input is higher than
80dBµV), it can be advised to switch this OFF.
DC: Decide whether the input should provide power to
an external amplifier. Choose between OFF or 12 V.
Remark: If the external amplifier needs 24 V, you can
change this in advanced settings (see further).
