KERBEROS POWER
7
EN
4. TECHNICAL PARAMETERS
Electric data of one photovoltaic power module*
Electric data - mains electricity
Input voltage
230 V AC 50 Hz
Power consumption
<
5W
Heating elements
Thermal regulator
Setting range
10 - 85°C
Thermal fuse
YES - electronic
Working conditions
Operating temperature
+5 až +40°C
Storage temperature
-10 až +40°C
Operating relative humidity
Max 75 % non condensing
Storage relative humidity
Max 90 % non condensing
Environmental dustiness
Chemical influence
Non aggressive
Construction parameters
Measurements (height x width x depth)
Weight
Ingress protection
Dust particles volume max 0,75 mg/m³
Input open circuit voltage (limits)
200 - 340 VDC
MPP tracking range
185 - 320 VDC
Maximum output current
9 A
Maximum efficiency
99 %
Typical wiring
8 x 260 Wp**
11,2 kg
IP 20
498 x 210 x 270 mm
WiFi / Ethernet communication module (optional)
Measurement period
The performance of heater / section
Number of heating elements or independent sections
1 - 3 pc
2 - 2,5 kW
The possibility of using a three-phase body with separate sections
YES
The possibility of using separate single phase heating elements
YES
The possibility of using a three phase body with a common center
NO
60 sec
History of data recording
365 days
** Different number of PV modules and different module power than recomended are
feasible but maximum input voltage must be strictly kept at any solar irradiation and
* KERBEROS POWER can be equipped with 1, 2 or 3 power modules
Number of power modules
1 - 3 pc
