CHAPTER 3: WELDING SYSTEM SET-UP
MODEL HF2 2 kHz HIGH FREQUENCY RESISTANCE WELDING POWER SUPPLY
990-057
3-7
9
Press [SAVE] to save your program. You are now back in the Weld Graph RUN State.
10
Make additional test welds and then re-program WELD time and weld CURRENT as necessary
to make a good weld. Strive to use minimum time and current necessary to make a good weld
so that the weld joint heat affected zone will be minimized.
11
Up to 128 different weld schedules can be created and saved. To recall any specific weld
schedule, press the up or down vertical arrow keys [ ] until the desired schedule number
appears on the display screen. A faster technique for recalling a specific schedule is to input
the Schedule number using the number keys.
