CHAPTER 3: WELDING SYSTEM SET-UP
MODEL HF2 2 kHz HIGH FREQUENCY RESISTANCE WELDING POWER SUPPLY
3-2
990-057
UNITEK EQUIPMENT FORCE FIRED,
FOOT ACTUATED WELD HEAD SYSTEM
Weld Head Set-up
1
Adjust the Weld Head Force Adjust
Knob to produce 5 units of force as
displayed on the Force Indicator. For a
complete description of force control
and its effect on the welding process,
please refer to your Weld Head manual.
2
Install electrodes in Weld Head
Electrode Holders.
Firing Switch Cable Connection
Connect the Weld Head Firing Switch Cable
Connector to the matching cable connector
on the rear of the HF2 Weld Control.
Figure 3-1. Firing Switch Cable Connection
Quick Start Programming Guide
1
Set the HF2 Weld Control front panel
WELD/NO WELD switch to NO
WELD.
2
Turn the circuit breaker switch located
on the HF2 Weld Control rear panel to
ON. After a series of power up screens,
the last RUN screen displayed will
appear. Press the [CHNG] key to access
the Weld Graph RUN screen for the
BASIC WELD Function.
3
Press [MENU]. The MAIN MENU
screen will appear.
