Unitek DS-400.2 Series, Руководство пользователя

Страница: 42 / 53

Control connection
41 04/2019 - V01 DS 400.2
CAN
-B
US
5.5 CAN-BUS
The CAN-BUS is a digital connection to the CNC control.
Optimum conditions are achieved with CNC controls and CAN components of LABOD electronic or
CAN Open.
Programming and operation by means of the control panel via the CAN-BUS.
Interface complies with the standard ISO 11898.
Adjustment and programming see Manual DS-CAN.
CAN BUS cable
Use a shielded bus conductor with a low shielding capacity.
Signal plus GND.
D-connector with a metal or metallized housing.
LiYCY 4x0.25+shield.
Designation Connector
no.
Cable colour
CAN-V+ 9 brown
CAN-GND 3 white
CAN-H 7 green
CAN-L 2 yellow
FM=jack
CAN BUS connection with several devices
Master Address xx Address xx Address xx
DS-BAx-DPC / E-DS-400-CAN-3x3
Terminating resistor at the end of the bus line > 120 Ohm between CAN-H and CAN-L
1
3
4
FM
5
2
9
8
6
7
1
3
4
FM
5
2
9
8
6
7
CAN-V+
CAN-H
1
3
4
FM
5
2
9
8
6
7
CAN-GND
CAN-L
(PE)
Schirm am Steckergehäuse
X9 X9 X9
C
AN
-BU
S
DSxx/BAxx
DSxx/BAxx
DSxx/BAxx
1
20
Shield at connector housing
The BUS interface is galvanically isolated
from the internal device voltage.
The voltage is supplied via an internal
isolated DC-DC converter.
CAN-V +9 to 15 V=
CAN-Bus isoliert /
CAN-GND auf gemeinsames Potential
bringen.