Unitek DS-400.2 Series, Руководство пользователя

Страница: 39 / 53

Control connection
DS 400-2 04/2019 - V01 38
Dig
ital o
ut
pu
ts
(o
pe
n e
m
itt
er
)
5.3 Digital outputs (open emitter)
DS-BAx-DPC/E-DS-400-digi-out-2
Output voltage
ON level max. +24 V=
OFF level <1 V=
Output current nom 1 A
Output current max. 2 A
Reference voltage +24 (X1:4)
Reference ground GNDE (X1:10)
The logic outputs 1 to 3 are rated for 24 V and 1A (short-time: 2 A).
Signal contact "Ready BTB/RDY" (Solid state relay)/ Ready BTB / RDY
DS-BAx-DPC/E-DS-400-BTB-3
Contact for max. 48 V/0.5 A
(not short-circuit proof)
Capacitive load max. 1 myF
Contact resistance max. 2 Ohm
The contact is closed
when the device is ready
for operation.
State signal via seven-
segment LED display.
In case of failures the contact is open.
Always install the BTB/RDY contact in
the safety circuit!
Protect the BTB/RDY signal path by
means of 0.5A!
Ready for operation opens
(red LED, open relay contact)
in case of error messages
in case of under-voltage of the auxiliary voltage (<20 V)
The message "under-voltage in the bus circuit" can be programmed. (Manual NDrive)
Output Connection Function State Parameter
BTB/RDY X1:1, X1:2 ready fixed/relay
DOUT1 X1:13 Digital output 1 programmable
DOUT2 X1:14 Digital output 2 programmable
DOUT3 X1:17 Digital output 3 programmable
DOUT4 Xx:Xx Digital output 4 programmable
+ 24 V for logic and auxiliary voltage
Observe the total current of all outputs
GNDE logic ground
_____________________
DS-BAx-DPC/DS-400-lgoiksp
X1:13 DOUT1
X1:14 DOUT2
+24
F_AUSx
100nF
24V/1A
DSxx/BAxx
X1:17 DOUT3
Digital output
Digital output 1
Digital output 2
Digital output 3
Digital
output
(X1:N)
(X1:O)
(X1:S)
(IP65)
BTB/RDY Solid State Relais
F_BTB
100nF
X1:1
X1:2
DSxx/BAxx
Safity
Circuit