DESCRIPTION OF THE DEVICE
ASSEMBLY INSTRUCTIONS
-Installation of portable wheels (See the sketch map1)
1. Take out the heater, and put it on a smooth solid tabletop or ground
2. Take out the foot plates
3. Align the two holes between each plate and the bottom of the heater to install the
plates, making sure that the screws are fully tightened
sketch map 1
-Installation of wall mounting (See the sketch map 3)
IMPORTANT:
Requirement of needed area for wall-mounting installation (See the sketch map 2)
sketch map 2
1. Drill two holes, one for each side, on the wall in a straight line;
2. Insert the expanded screw into the holes, and install the steel hooks securely to
the wall by the screws.
3. Raise the heater upright, and then push the heater onto the hooks
1. Wheel
4. Switch
2.Plate
5 Thermostat
3.Body
