To switch back to standby position, simply press the OFF button on control panel or press the
ON/OFF button on the remote control.
2. Speed: Wind speed can be adjusted to 3 levels (Low – Medium – High) by pressing the 'Speed'
button. Each time the 'Speed' button is pressed, the relative indication will appear on the LED
screen.
3. Timer: Press the 'Timer' button to set the operating time between 1-12 hours. The timer
switches the unit to standby after preset time. Each time the button is pressed, time is
increased by 1 hour and the time indicator lights on the screen.
To cancel the timer, simply press the button until the indicator shows “00
”
4. Swing: Press the 'Swing' button to change the wind direction. The swing indication will light
on the screen. Press the button again to stop the oscillation. The vertical direction of air flow
can be adjusted manually by directing the outlet louvers up and down.
5. Cooler: To activate the air cooler function, press the “Cooler” button. The water pump will take
water from the tank and pour it onto the cooling pad. The cooling pad with the assistance of the
water absorbs the incoming heat while the air is released with the help of fan. The cool breeze drops
the temperature and creates a relaxing cooling effect.
Caution: If the water Level is low or there is no water in the tank, do not activate the 'Cooler'
function. Check the water level and add water if needed. Replace standing water with fresh water.
It is recommended to replace water in the tank at least once in a week.
6. Ionizer: Press 'Ion' button to activate the ionizer function. Ion indication on the screen will
light and the negative ion release will start.
7. Remote control: The remote control operates with a CR2025 button cell.
Before use,
please pull out the card which is inserted at the button of the remote control.
OPERATING THE WATER TANK
Check the level of water in the tank frequently. Be sure that the water level is not below the 'MIN'
marking which is located on the water lank. Activating the 'Cooler’ function with insufficient amount
of water may cause malfunction of the water pump and the warranty of your product will be void.
Before refilling with water, turn your unit to OFF position by pressing the switch located on the
back panel and unplug the power card.
USING THE ICE BOXES
In order to increase the cooling effect of your fan, you can use ice boxes which are supplied with the
unit. Before using, place them in the freezing compartment of your refrigerator for a few hours.
Then place them into the water tank and add water to the 'MAX’ level.
CLEANING AND MAINTENANCE
After operation for a long time, the dust accumulated in the dust filter or cooling pad may influence
the inflow of air. Therefore, it is recommended to clean your fan regularly. Please follow the steps
below to clean your appliance.
Turn off the unit and unplug the power cord before cleaning and maintenance.
