2.Wall mounting:
First, use an electric drill to drill four holes on the wall. Diameter and
depth for the drilling holes , you can find the distance between
the four holes .
Second, insert the plastic bulged screws into the drilling holes, then lat
the screws through the hooks and aim them at the holes, fix the hooks on
the wall. Aim two rubber pads on the back of heater with screws.
Third, find two holes locations on the handle at the rear of the heater and fix
them to the hooks on the wall. Pull the heater rightward to make the hooks
tally with the holes locations.
NOTE:
If wall mount method is adopted, installation of truckles is not allowed.
The mounting location shall be 15cm above the floor and 50cm beneath
the ceiling or more. You may refer to the following figure.
