UNITED MICA UHM-782, Руководство пользователя

Страница: 5 / 6

NOTE:
If wall mount method is adopted, installation of truckles is not allowed.
The mounting location shall be 15cm above the floor and 50cm beneath
the ceiling or more. You may refer to the following figure.
OPERATION
1) Room temperature can be adjusted using the thermostat. Simply turn the thermostat
knob clockwise, to increase the heater, and anti-clockwise to decrease the temperature,
until you reach the desired temperature.
2) Switch the heater to one of the following power settings.
UHM-782: Push switch one (I) for 800W
Push switch two (II) for 1200W
Push switch three (
Ⅲ
) for 2000W
3) The power switch lights up when activated.
4) Turning the thermostat control clockwise will increase the “set” temperature.
5) Turning the thermostat anti-clockwise will decrease the “set” temperature.
6) Do not cover the heater at any time during operation. There is a risk of fire if the
heater is covered.
7) Once you have finished using your heater, turn the power switches off, and the
thermostat control switch to the “Low” positions, and unplug from the mains supply.
Ⅵ
.Circuit diagram