Control Box Installation
9
For 3-wire 240V power installations
the incoming Line-1 and Line-2 wires
will need to be connected to the
correspondingly labeled power lugs on
the circuit board. The incoming Line-2
will also need to be brought to the
Neutral power lug. The ground wire will
need to be connected to the ground lug
fastened to the aluminum frame right
next to the board.
For 120V power installations
the
240V transformer will need to be
swapped out with it’s 120V equivalent.
The incoming Line-1 and Neutral
wires will need to be connected to the
correspondingly labeled power lugs on
the circuit board. The incoming Neutral
will also need to be brought to the
Line-2 power lug on the circuit board.
Finishing Installation
After installation of the C5 control box is complete, its time to read through
the installation manual and user’s guide booklet that comes packaged with
the topside control. The installation manual will guid you through installing
and programming the topside which completes the installation process.
NEUTRAL
LINE-2
LINE-1
NEUTRAL
LINE-2
LINE-1
Содержание C5 Series
Страница 1: ......