-7-
3.
Slide both hose clamps over the aluminium flex pipe. Then slide the flex pipe over the air intake tube of the
stove. Next tighten the hose clamp over the end of the aluminium flex hose.
4.
Route the flex pipe to the through wall connection and slide the flex pipe over the tail piece. Apply the
second hose clamp over the tail piece and tighten.
SECURING APPLIANCE TO THE FLOOR
Use the designated holes to secure the unit to the floor as shown.
2.
Slide the tail portion of the weather hood through the hole. Secure the weather hood with the provided
screws at each of the four corners. Caulk around the edges of the hood and screws to seal. This task should
be done after the stove has been installed and the exhaust piping routed. Try to position the hole for the air
intake as near as possible to the stove.
