United Process Controls, Inc.
Oxyfire-LT Installation/Operation Manual
2 |
P a g e
Revision 3
January 27, 2015
Copyright ©
United Process Controls, Inc.
No part of this document may be stored or reproduced by any means whatsoever without prior written
permission of United Process Controls, Inc.
All trademarks used in this publication are duly marked and the sole property of their respective owners. No
attempt at trademark or copyright infringement is intended or implied.
The MMI oxygen sensor is a zirconium type oxygen sensor to be used by the industrial operator at his or her own
risk. Oxyfire sensors are for use in combustion trim control only. Do not use with full-range air/fuel ratio control.
United Process Controls, Inc. makes no warranties expressed or implied beyond the written warranty presented at
initial purchase. United Process Controls, Inc. is not responsible for any product, process, damage or injury
incurred while using the oxygen sensor. United Process Controls, Inc. makes no representations or warranties
with respect to the contents hereof and specifically disclaims any warranties of merchantability or fitness for any
particular application or purpose.
For assistance please contact:
United Process Controls Inc.
TEL: +1 513 772 1000 • FAX: +1 513 326 7090
Toll-Free North A1-800-547-1055
www.group-upc.com
