UNITED OFFICE 320246 1901, Руководство по эксплуатации

Страница: 25 / 102

■ 22 │
GB│IE
UAVK 180 A1
Overheating protection
This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the appliance switches itself off automatically.
The
overheat/overload LED
3
continuously lights up red until the motor has
cooled down sufficiently.
If this occurs, do the following:
WARNING! – RISK OF INJURY!
► Pull the power plug out of the power socket to prevent unintended starting
of the appliance.
♦ Switch the appliance off by sliding the AUTO/OFF/REV switch ! to the
OFF
position.
♦ Empty the waste collector as described in the section "Emptying the
waste collector".
♦ Allow the appliance to cool down for about 30 minutes.
♦ Replace the plug in the mains power socket.
♦ Switch the appliance on by sliding the
AUTO/OFF/REV
switch ! to the
AUTO position. The overheat/overload LED
3
goes out when the appli-
ance has cooled down sufficiently.
♦ The power/bin full LED
-
lights up blue continuously. The appliance is
now ready for use.
We recommend that you let the appliance cool down for about 30 minutes after
10 minutes of automatic operation or after 3 minutes of manual operation.
Emptying the waste collector
WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on.
NOTE
► Empty the waste collector regularly to prevent the shredded material
from being drawn into the cutting blades from below.
► When the waste collector is full, the appliance switches off automatically.
The
power/bin full
LED - flashes blue and beeps to indicate that you
need to empty the waste collector .
♦ Remove the cutter attachment from the waste collector using the
integrated carrying handles .
♦ Empty the waste collector . Please note that the various waste types (plastic
and paper) must be disposed of separately.
♦ Place the cutter attachment onto the waste collector using the integrat-
ed carrying handles so that the mains cable protrudes to the rear.