UNITED OFFICE 314014, Инструкция по эксплуатации и правила безопасности

Страница: 25 / 116

■ 22 │
GB│IE
UAVS 300 A1
Assembly
WARNING! – RISK OF INJURY!
► Do not connect the appliance to a power socket during assembly .
► The cutting blades in the cutter attachment 3 of the appliance are very
sharp . Take extreme care when assembling the appliance .
♦ Place the appliance base t flat on the floor with the rear side downwards .
♦ Fit the plain castors
0
on the front and the castors with locking levers
q
on the rear of the base t . Press the castors into the holes on the appliance
base t until you hear them click into place (see fig . 1) .
Fig . 1
Fig . 2
♦ Place the appliance base t on the castors after fitting them .
♦ Hold the cutter attachment
3
by the two integrated carrying recesses
5
and position it over the appliance base t so that the power cable 1 points
backwards and the opening in the appliance base t points forwards .
♦ Press the cutter attachment
3
firmly downwards until you hear it lock into
place on the appliance base t (see fig . 2) .
♦ Place the small waste collector w in the large waste collector e (see fig . 3) .
Fig . 3 Fig . 4
♦ Slide the large waste collector e fully into the appliance base t (see fig . 4) .