UNITED OFFICE 304611, Руководство по эксплуатации

Страница: 21 / 88

■ 18
│
GB│IE
UAV 250 A2
Initial start-up
NOTE
► As every shredder is tested for functionality after manufacture, it is possible
that you may find paper residue in the cutting blades .
■ Push the small waste container
2
onto the rails inside the large waste
container
4
.
■ Place the cutter attachment
1
onto the large waste container
4
so that the
mains cable sticks out to the rear .
■ Insert the plug into a mains socket .
Use
max.
x 80g/m2
10
You can shred up to 10 sheets (80 g/m 2 paper) at the same time .
CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening if it still has paper clips larger
than 25 mm attached! These could damage the cutting blades .
Switching the appliance on
■ Set the switch
9
to “AUTO” for shredding . The “Power” lamp
7
lights up
permanently green .
Inserting paper
■ Insert paper into the cutter opening for paper
6
from above and in portrait
format .
The motor starts automatically and switches itself off automatically if no further
paper is inserted . You can shred up to 10 sheets (80 g/m
2 paper) at the same
time .
NOTE
► Regularly remove any residue left in the cutting blades with a suitable tool,
e .g . a pair of tweezers . Ensure that the appliance is unplugged before
doing this .